Data lansării: 2020-06-19
O nouă versiune de QGIS întregește șirul marilor succese pe care le-am înregistrat în cei 18 ani de dezvoltare. Această versiune este atât de încărcată cu noi caracteristici și îmbunătățiri mari și mici, încât este greu de știut cu ce să începem. Dintre funcționalitățile majore amintim suportul pentru plăcuțele vectoriale, avansul uriaș în suportul pentru mdal / suprafețe poliedrice, suport nativ pentru date temporale în WMS-T, PG Raster, furnizori de vectori și straturi de tip suprafață poliedrică. Nici utilizatorii focusați pe cartografie și digitizare nu au fost lăsați în afară, multe opțiuni noi adresându-li-se acestora!
Mulțumiri
Dorim să mulțumim dezvoltatorilor, creatorilor documentației, testerilor și voluntarilor pentru timpul dedicat și pentru efortul depus (sau pentru că au finanțat anumite persoane în scopurile enumerate). Din partea comunității QGIS, vă urăm să vă bucurați de această versiune! Dacă doriți să contribuiți cu efort, bani sau să vă implicați într-un mod care ar putea îmbunătăți QGIS, vă rugăm să vizitați QGIS.ORG și să oferiți o mână de ajutor!
QGIS este susținut din donații și prin programul membrilor susținători. Lista curentă a celor care au contribuit financiar la acest proiect poate fi consultată aici. Dacă doriți să deveniți un membru susținător oficial al proiectului, vă rugăm să vizitați pagina membrilor susținători. Sponsorizările QGIS ne ajută să finanțăm întâlnirea dezvoltatorilor o dată la șase luni, să menținem infrastructura proiectului și să finanțăm eforturile de eliminare a erorilor. În continuare este prezentată lista completă a sponsorilor actuali - acestora le transmitem mulțumirile noastre!
QGIS este un soft gratuit iar dvs. nu aveți obligația de a plăti pentru folosirea lui - de fapt, vrem să încurajăm oamenii de pretutindeni să-l folosească, indiferent de starea financiară sau socială - având convingerea că, oferind utilizatorilor posibilități de decizie spațială, vom obține o societate mai bună.
De acum, este complet posibilă personalizarea culorii fontului, a zonei tampon etc. în cazul adnotărilor utilizate la decorarea graticulelor hărților.
Această funcționalitate a fost finanțată de iMHere Asia
Această funcționalitate a fost dezvoltată de Mathieu Pellerin
În controlerul temporal s-a introdus o setare dedicată cumulării intervalului temporal al animației. Astfel, toate cadrele animației vor avea același moment de început, diferind doar datele și orele de sfârșit.
Acest lucru este util în cazul în care doriți să observați acumularea în timp a datelor, în locul afișării unei „ferestre animate a datelor momentane”.
Această funcționalitate a fost finanțată de Serviciul Meteorologic din Canada
Această funcționalitate a fost dezvoltată de Kartoza / Samweli Mwakisambwe
Când este setat acest mod, stratul se redesenează automat, la fiecare schimbare a intervalului temporal, fără aplicarea vreunei filtrări în funcție de timp asupra entităților.
Această configurație este utilă atunci când stratul are setări de simbologie care variază în funcție de intervalul temporal. Cum ar fi, de exemplu, atunci când un strat folosește expresii de randare bazate pe reguli sau expresii de simbologie definite prin intermediul datelor.
Această funcționalitate a fost dezvoltată de: Nyall Dawson
În cazul straturilor vectoriale sunt disponibile următoarele capabilități temporale:
Interval de timp static (conform posibilităților stratului raster): întregului strat i se va aplica un singur interval de timp static. Entitățile stratului vor fi afișate ori de câte ori ora canevasului se suprapune cu ora stratului
„Câmp unic cu DateTime”: este posibilă selectarea unui singur câmp Date sau DateTime dintr-un strat. Entitățile vor fi afișate ori de câte ori valoarea câmpului se încadrează în intervalul de timp al canevasului
„Câmpuri separate pentru Data/Ora de Început și Sfârșit”: este permisă selectarea din strat a câmpurilor Date/DateTime de început și de sfârșit. Entitățile se vor afișa ori de câte ori intervalul de timp calculat din aceste câmpuri se suprapune intervalului de timp al canevasului
Ar trebui să avem în vedere extinderea acestui lucru în viitor, de ex. să adăugăm moduri de genul „oră de pornire + durată fixă”, „oră de pornire + durată din câmp”, „ore de pornire și de sfârșit definite prin expresii” etc.
Câteva limitări sesizate:
În prezent, se pot utiliza doar câmpurile Date/DateTime. S-a decis astfel pentru a simplifica gestionarea formatului și pentru a evita complicațiile care ar fi apărut dacă s-ar fi utilizat șiruri de caractere cu diferite formate DateTime. În viitor, ar trebui să permitem selectarea câmpurilor cu șiruri și să permitem utilizatorilor introducerea de șiruri în format DateTime personalizat.
Spre deosebire de abordarea folosită în cadrul pluginului Time Manager, pentru a efectua filtrarea, aici ne bazăm complet pe expresiile QGIS și pe solicitarea de entități (Time Manager folosește șiruri de filtrare a straturilor și o sintaxă de filtrare SQL nativă, în așa fel încât filtrarea să aibă loc pe backend). Acest lucru este intenționat, întrucât oferă o abordare de filtrare unificată, indiferent de furnizorul utilizat (adică nu trebuie să ne facem griji pentru varietatea dialectelor de SQL utilizate de către furnizori). Frumusețea compilării de expresii de extragere a entităților ar trebui să presupună că expresiile QGIS sunt transformate magic în interogări de backend native, DAAAAAAAAAAR… datorită lipsei suportului pentru șirurile de caractere DateTime, în prezent ne bazăm pe expresia „to_datetime”. Niciunul dintre compilatoarele de expresii nu gestionează această funcție, astfel încât, în prezent, *toată* filtrarea se face în QGIS. Trebuie să adăugăm funcții pentru crearea de șiruri DateTime optimizate, iar ulterior să ne asigurăm că diversele compilatoare mapează corect aceste șiruri, conform sintaxei filtrului din backend, pentru ca toată munca de filtrare să aibă loc pe partea bazei de date…
Ca atare, în prezent, pentru straturile mari performanța este mult mai slabă comparativ cu cea oferită de Time Manager (întrucât setul de entități expuse este mai mic, nu există, de exemplu, gestionarea interpolării), însă avantajele constau în ușurința în utilizarea cadrului temporal nativ și în asocierea straturilor vectoriale animate împreună cu straturile raster și cu suprafețele poliedrice!
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Rasterelor Postgres li s-au adăugat capabilități temporale.
Această funcționalitate a fost finanțată de ARPA Piemonte
Această funcționalitate a fost dezvoltată de Alessandro Pasotti
Această caracteristică permite manipularea timpului în cadrul proiectelor.
Vi se oferă posibilitatea de încadrare a proiectului într-un interval temporal, fie introducându-l manual, fie calculându-l din straturile temporale ale proiectului curent. Varianta din urmă se poate concretiza dând clic pe butonul „Calculare din Straturi”.
Această implementare pregătește cadrul necesar pentru introducerea animației la nivel de entitate în straturile temporale ale aplicației QGIS.
Iată un exemplu de setare a intervalului temporal al proiectului.
Discuțiile premergătoare implementării suportului temporal în QGIS se regăsesc aici și aici.
Această funcționalitate a fost finanțată de Serviciul Meteorologic din Canada
Această funcționalitate a fost dezvoltată de Kartoza / Samweli Mwakisambwe
Această caracteristică oferă abilități de constrângere în straturile WMS Temporale (WMS-T) din QGIS. Astfel, există posibilitatea de restricționare a intervalului DateTime pentru orice strat temporal provenit de la un furnizor WMS-T.
Utilizatorului îi este permisă specificarea intervalului DateTime dorit într-un strat, în fila „Sursă” a ferestrei cu proprietăți.
Mai jos este explicitat fluxul de lucru.
Notă: Pentru solicitări de instantanee temporale, chiar dacă există specificat un interval cu date de început și de sfârșit, prioritar va fi momentul DateTime solicitat și nu intervalul.
Această funcționalitate a fost finanțată de Serviciul Meteorologic din Canada
Această funcționalitate a fost dezvoltată de Kartoza / Samweli Mwakisambwe
S-a implementat un API dedicat suportului temporal din QGIS.
Puteți găsi API-ul pentru Python căutând cuvântul «Temporal» în documentele python (link).
Această funcționalitate a fost finanțată de Serviciul Meteorologic din Canada
Această funcționalitate a fost dezvoltată de Kartoza / Samweli Mwakisambwe
De acum, instrumentul cartografic de identificare este capabil să inspecteze atributele entităților din plăcuțele vectoriale.
Această funcționalitate a fost finanțată de Diverși finanțatori
Această funcționalitate a fost dezvoltată de Lutra Consulting (Martin Dobias)
Această funcționalitate a fost finanțată de Grupul Utilizatorilor Elvețieni de QGIS
Această funcționalitate a fost dezvoltată de Denis Rouzaud
Dacă este activă opțiunea de „Deschidere a tabelelor de atribute în ferestre andocabile”, tabelele respective se vor afișa în file noi, deasupra celor existente.
Această funcționalitate a fost dezvoltată de Germán Carrillo
Curbele de nivel desenate de noul generator se calculează automat din banda raster sursă. Este posibilă setarea intervalului dintre curbele de nivel și alegerea simbolului utilizat pentru linii.
În plus, există suport pentru „izolinii index” - curbe de nivel distanțate la intervale mai mari și reprezentate, de obicei, printr-o linie îngroșată.
Dacă vom genera curbe de nivel pe rastere de intrare cu dimensiuni similare cu ale rasterelor de ieșire, liniile generate vor conține prea multe detalii. Acest detaliu se poate remedia prin folosirea factorului de „reducere” - acesta va impune o rezoluție mai mică pentru rasterul sursă.
Această funcționalitate a fost dezvoltată de Martin Dobias
Conform unei Cerințe s-a introdus o nouă valoare procentuală (a dimensiunii imaginii originale) în cazul straturilor Simbol de tip Raster și de Umplere cu Raster (la sugestia lui nirvn ).
De exemplu, un strat conține imagini raster de diferite dimensiuni și raporturi de aspect:
Dacă folosim ca unitate de măsură valorile existente ale imaginilor Raster, stratul va arăta în modul următor (cu un crocodil normal, dar cu o girafă uriașă):
sau astfel (cu o girafă normală, dar cu un crocodil prea mic):
Noua valoare a unităților de măsură, procentuală, este destinată rezolvării problemelor semnalate mai sus.
Ambele teste de unitate rescrise, „qgis_rasterfilltest” și „qgis_rastermarkertest”, folosesc un nou set de imagini de control, în scopul testării valorii procentuale a unităților de mărime.
Această funcționalitate a fost dezvoltată de beketata
S-a adăugat posibilitatea de definire cu ajutorul datelor a familiei și a stilului caracterelor folosite la crearea simbolurilor de tip font. Acest lucru poate fi util într-o serie de scenarii, incluzând contextul multilingvistic, în care o proprietate definită poate evita duplicarea seturilor de date.
Această funcționalitate a fost finanțată de iMHere Asia
Această funcționalitate a fost dezvoltată de Mathieu Pellerin
Folosind această nouă setare, utilizatorii pot stabili stilurile pentru familiile de fonturi, facilitate indisponibilă până acum.
Această funcționalitate a fost finanțată de iMHere Asia
Această funcționalitate a fost dezvoltată de Mathieu Pellerin
Atunci când este activată, această opțiune va interpreta codul HTML din conținutul etichetelor conform instrucțiunilor de formatare legate de CULOAREA TEXTULUI.
Notă: SUNT INTERPRETATE DOAR INSTRUCȚIUNILE HTML REFERITOARE LA CULOARE. Aceasta NU este o eroare, formatarea HTML în etichete fiind proiectată doar pentru „testarea pieței” și, în consecință, au fost luate în considerare doar opțiunile de setare care nu afectează forma fontului.
În plus, funcționează corect cu TOATE celelalte setări ale etichetelor, inclusiv umbrele, zonele tampon, curbarea etichetelor etc!
Câteva imagini demonstrative:
Această funcționalitate a fost finanțată de geoProRegio AG
Această funcționalitate a fost dezvoltată de: Nyall Dawson
S-a adăugat posibilitatea de plasare automată a etichetelor în afara entităților poligonale.
Această facilitate acționează astfel:
Ca un nou mod de plasare, care plasează etichetele poligoanelor întotdeauna în afara entităților:
Prin bifarea opțiunii de „Permitere a poziționării etichetelor în afara poligoanelor”, atunci când se utilizează alte moduri de poziționare, care nu permit așezarea etichetei în interiorul poligonului:
Caseta de bifare care „Permite plasarea etichetelor în afara poligoanelor” poate fi definită prin intermediul datelor, îngăduind utilizatorilor fie să permită sau să împiedice etichetarea în exterior, fie să forțeze etichetarea exterioară pentru fiecare entitate în parte.
Algoritmul de poziționare se bazează pe modificarea propusă de Rylov & Reimer (2016) „Un algoritm practic pentru adnotarea în exteriorul suprafeței entităților”. În timp ce Rylov & Reimer propun pentru selectarea punctelor candidat ale etichetelor o abordare bazată pe o linie de baleiere orizontală, în practică s-a constatat că aceasta generează rezultate inferioare (fiind și mai lentă) comparativ cu traversarea inelului exterior al poligonului și generarea punctelor candidat la intervale regulate (în special pentru poligoanele înguste, aproape orizontale).
Așa cum se arată în captura de ecran de mai sus, modul de plasare a etichetelor în afara insulelor funcționează corect, atunci când se utilizează modul de aliniere multiliniar „Se urmează poziționarea etichetelor”.
Această funcționalitate a fost finanțată de Grupul Utilizatorilor Elvețieni de QGIS
Această funcționalitate a fost dezvoltată de: Nyall Dawson
S-a continuat munca de implementare a straturilor cu plăcuțe vectoriale.
S-a adăugat suport pentru etichetarea straturilor cu placuțe vectoriale. Momentan, funcționalitatea este valabilă doar pentru qgis_core… Va urma și suportul GUI. Etichetarea folosește conceptele utilizate și la reprezentarea plăcuțelor vectoriale: avem o listă cu stiluri de etichetare, fiecare stil fiind definit prin numele sub-stratului, tipul geometriei, expresia de filtrare, intervalul de zoom și configurația (QgsPalLayerSettings).
Rețineți că la etichetare am întămpinat o problemă de genul „oul sau găina”: având în vedere că pentru plăcuțele vectoriale se creează, într-un sub-strat, câmpuri QgsFields bazate pe câmpurile care solicită randarea și etichetarea, la etichetare era imposibilă obținerea câmpurilor obligatorii dacă acestea nu erau disponibile deja în contextul expresiei (de aici, unele mici adăugări la QgsProperty, QgsPropertyCollection, QgsPalLayerSettings, pentru a putea obține numele câmpurilor obligatorii fără pregătirea prealabilă a unor expresii interne).
Configurarea în consola Python a modului de etichetare prezentat mai sus:
s = QgsVectorTileBasicLabelingStyle()
s.setLayerName("place")
s.setGeometryType(QgsWkbTypes.PointGeometry)
s.setFilterExpression("rank = 1 AND class = 'country'")
ls=QgsPalLayerSettings()
ls.drawLabels=True
ls.fieldName="name"
ls.placement = QgsPalLayerSettings.OverPoint s.setLabelSettings(ls)
labeling = QgsVectorTileBasicLabeling()
labeling.setStyles([s])
iface.activeLayer().setLabeling(labeling)
Această funcționalitate a fost finanțată de Diverși finanțatori
Această funcționalitate a fost dezvoltată de Lutra Consulting (Martin Dobias)
De acum, utilizatorii au controlul asupra locului în care o casetă de text ar trebui să se conecteze la o etichetă (anterior, aveau control doar asupra locului în care o casetă de text se conecta la geometria entității respective).
Posibilități de conectare:
La cel mai apropiat punct (comportamentul anterior)
La centroidul etichetei
La colțuri: stânga sus / dreapta sus / stânga jos / dreapta jos / etc
De asemenea, este posibilă definirea conectării cu ajutorul datelor.
S-au remediat unele aspecte negative ale casetelor de etichetare!
Rezultatul anterior (metoda celui mai apropiat punct):
Noua metodă de poziționare, la „centroid”:
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Această caracteristică permite utilizatorului alegerea grupurilor de seturi de date.. Acest lucru se poate face din fila sursă a ferestrei cu proprietățile stratului ce conține suprafața poliedrică.
O nouă ierarhizare de tip arbore afișează toate grupurile cu seturi de date disponibile de la furnizor. Grupurile cu seturi de date pot fi bifate/debifate și redenumite.
Acest control grafic oferă, totodată, butoane pentru încărcarea din fișiere a grupurilor de date suplimentare, pentru extinderea/restrângerea arborelui, pentru bifarea/debifarea tuturor elementelor și pentru resetarea valorilor prestabilite de la furnizor (deocamdată, doar numele original).
Doar grupul de date selectat se va afișa în controlul grafic cu setările de randare ale setului de date activ.
Această funcționalitate a fost finanțată de Deltares
Această funcționalitate a fost dezvoltată de Lutra Consulting (Vincent Cloarec)
În cadrul acestei funcțiuni, MDAL citește valorile scalare clasificate din setul de date. Atunci când valorile sunt clasificate, setările implicite de randare au gama de culori și etichetele conforme cu valorile clasificate.
Această funcționalitate a fost finanțată de Deltares
Această funcționalitate a fost dezvoltată de Lutra Consulting (Vincent Cloarec)
S-a adăugat API-ului o metodă care permite acroșarea la suprafețele poliedrice.
Metoda returnează poziția punctului de acroșare la cea mai apropiată suprafață poliedrică :
Pentru un vertex, poziția acestuia reprezintă chiar poziția acroșării
Pentru o muchie, poziția acroșării este dată de punctul proiectat pe muchie sau de o extremitate a acesteia, atunci când proiecția cade în afara muchiei
Pentru o suprafață, poziția acroșării este în centroidul acesteia
Poziția returnată utilizează coordonatele hărții.
Această funcționalitate a fost finanțată de Deltares
Această funcționalitate a fost dezvoltată de Lutra Consulting (Vincent Cloarec)
Această caracteristică oferă un nou mod de generare a suprafețelor poliedrice 1D, cu muchii a căror lățime este variabilă. De acum, lățimile și culorile variază în funcție de valorile din muchii sau vertecși.
Utilizatorul poate defini lățimile min/max care vor fi folosite la generare.
La fel și la culori, nuanțele pot fi definite de către utilizator (similar rasterelor și suprafețelor poliedrice 2D).
Pentru această nouă randare, s-au introdus noi clase generice, care sunt utilizabile și în afara cadrului de lucru cu suprafețe poliedrice.
Această funcționalitate a fost finanțată de Deltares
Această funcționalitate a fost dezvoltată de Lutra Consulting (Vincent Cloarec)
Pe lângă actualizarea la MDAL 0.5.91, această caracteristică permite încărcarea mai multor suprafețe poliedrice dintr-un singur fișier.
După analiza fișierului se lansează o fereastră de dialog pentru sub-straturi, care urmează o logică similară celei de la straturile vectoriale sau raster.
Această funcționalitate a fost finanțată de Deltares
Această funcționalitate a fost dezvoltată de Lutra Consulting (Vincent Cloarec)
În suprafețele poliedrice timpul este definit prin:
Momentul de referință, specificat prin dată, proiect sau utilizator
Ora relativă, asociată fiecărui set de date
Intervalul de timp, indicat de momentele de început și de final ale tuturor seturilor de date
Reference time : AT
Dataset 1 time o---RT------RT-----RT-----------RT
Dataset 2 time o-------RT------RT--------RT
Dataset 3 time o--------------------------RT-------RT------RT
Time extent of layer o----<---------------------------------------->
- AT : absolute time (QDateTime)
- RT : relative time (qint64)
Clasa QgsMeshDataprovidertemporalCapilities stochează timpul de referință furnizat de date și toate orele relative ale setului de date. Această clasă poate returna indexul setului de date dintr-un grup de seturi și o oră relativă față de cea de referință. Momentul de referință (care poate fi diferit de ora de referință a furnizorului) și intervalul de timp absolut sunt stocate în clasa gsMeshTemporalProperties
Setările temporale din controlul grafic al proprietăților conțin doar ora de referință și unitatea de timp a furnizorului:
Momentul de referință implicit al stratului este setat (în ordinea priorității):
De la furnizor, dacă se află în datele respective
Din proiect, dacă este specificat
Din data curentă, ora fiind 00h00
Utilizatorul îl poate modifica, dacă dorește.
Renderele 2D și 3D accesează indexul setului de date activ din stratul al cărui interval de timp este stocat în QgsContextRenderer
și în Qgs3DMapSettings
: timpul relativ este calculat ca diferența dintre intervalul de timp din QgsContextRenderer
și ora de referință stocată în QgsMeshTemporalProperties
. Indexul setului de date provine din QgsMeshDataproviderTemporalCapabilitate
care mapează ora relativă cu indexul setului de date.
Datele sunt aduse de la furnizor împreună cu indexul setului de date.
Există, de asemenea, opțiunea de a avea un set de date statice, adică de a alege setul de date care va fi randat independent de controlerul de timp din QGIS. Pentru aceasta, utilizatorul va bifa caseta setului de date statice, din fila setărilor temporale a ferestrei cu proprietăți: Deocamdată, întrucât implementarea a fost simplă și permite alegerea directă a setului de date necesar, utilizatorul poate alege independent seturile de date scalare și vectoriale, din casetele combo ce conțin timpul asociat pentru fiecare set de date (timpul relativ In cazul datelor care nu au timp de referință). Dacă ar fi necesar, s-ar putea implementa un timp unic, dar astfel s-ar putea ajunge la rezultate inconsistente, datorită seturilor de date nesincronizate. Setările setului de date statice sunt disponibile în fila setărilor temporale, dar pot fi introduse cu ușurință în pagina sursă, dacă se dorește acest lucru.
Această funcționalitate a fost finanțată de Lutra Consulting
Această funcționalitate a fost dezvoltată de Lutra Consulting (Vincent Cloarec)
Reeșantionarea este disponibilă pentru seturile de date definite pe fețe, de ex. valorile vertecșilor sunt calculate din valorile fețelor.
Această caracteristică implementează reeșantionarea valorilor din vertecși la fețe, folosind metoda mediei vecinilor.
Metoda implicită este setată pe „niciuna” pentru eșantionarea de la vertecși la fețe și pe „media vecinilor” pentru reeșantionarea de la fețe la vertecși. Astfel, randarea implicită va fi întotdeauna lină.
Această funcționalitate a fost dezvoltată de Lutra Consulting (Vincent Cloarec)
Această caracteristică permite utilizatorului să coloreze setul de date vectorial al suprafeței poliedrice (săgețile, liniile fluxului, urmele) folosind paleta de culori, în funcție de mărimea vectorului.
Această funcționalitate a fost finanțată de Deltares
Această funcționalitate a fost dezvoltată de Lutra Consulting (Vincent Cloarec)
Această caracteristică adaugă opțiunea de salvare a stilului unei suprafețe poliedrice într-un fișier qml, așa cum se procedează în cazul straturilor vectoriale și a rasterelor.
De asemenea, s-a reconstruit stilul meniului pentru fereastra de proprietăți a straturilor vectoriale și raster.
Această funcționalitate a fost finanțată de Artelia Group
Această funcționalitate a fost dezvoltată de Lutra Consulting (Vincent Cloarec)
Actualizare la MDAL 0.5.90
Implementarea inițială a Suportului pentru elemente 1D în Straturile cu Suprafețe Poliedrice
Suprafețele poliedrice 1D sunt compuse din vertecși și muchii. O muchie leagă două vertexuri și poate avea alocate date (scalare sau vectoriale). Suprafețele poliedrice 1D pot fi folosite, de exemplu, pentru modelarea unui sistem de drenaj urban.
S-au introdus noi opțiuni pentru afișarea suprafețelor poliedrice 1D (muchii) în fila cadrului
De asemenea, pentru suprafețele poliedrice 1D (margini sau vârfuri) există noi opțiuni în fila contururilor
Rețineți că nu sunt implementate toate funcționalitățile disponibile pentru suprafețele poliedrice 2D, ca de exemplu
Suport pentru Calculatorul de Suprafețe Poliedrice 1D
Randarea 3D a suprafețelor poliedrice 1D
Identificarea și Plotarea în Crayfish (vor fi adăugate în următorul PR)
Unele funcții nu sunt necesare pentru suprafețele poliedrice 1D, cum ar fi
Exportarea contururilor suprafețelor poliedrice
Această funcționalitate a fost dezvoltată de Peter Petrik
Întrucât suprafețele poliedrice pot fi compuse din milioane de triunghiuri, afișarea lor va fi foarte lentă, mai ales că sunt reprezentate toate triunghiurile chiar și atunci când acestea sunt prea mici pentru a fi observate.
Pentru aceste situații, această caracteristică oferă o opțiune de simplificare a suprafeței poliedrice. Procedând în acest fel, vor rezulta una sau mai multe suprafețe simplificate care constituie niveluri de detaliere. La generarea suprafeței poliedrice, este ales nivelul de detaliere corespunzător unei reprezentări adecvate, în funcție de vizualizare.
O nouă filă din proprietățile stratului permite utilizatorului modificarea următoarelor setări:
Factorul de reducere, care este utilizat pentru a simplifica o suprafață poliedrică; numărul de triunghiuri pentru fiecare nivel de detaliere este aproximativ egal cu numărul de triunghiuri ale nivelului anterior, împărțit la factorul de reducere
Rezoluția maximă a suprafeței poliedrice: aceasta este dimensiunea medie (în pixeli) a triunghiurilor care sunt permise în afișare; dacă dimensiunea medie a suprafeței poliedrice este mai mică decât această valoare, atunci va fi afișată o suprafață cu un nivel mai mic de detaliere, adică una cu o dimensiune medie mai mare decât rezoluția suprafeței maxime.
Această caracteristică permite accelerarea randării, așa cum se poate vedea în tabelele de mai jos (rezultatul este dat în milisecunde):
GIF demonstrativ Înainte:
După:
Această funcționalitate a fost finanțată de BMT
Această funcționalitate a fost dezvoltată de Lutra Consulting (Vincent Cloarec)
Această caracteristică adaugă opțiunea de afișare a săgeților unei suprafețe poliedrice 3D, corespunzător setului de date vectorial.
Setul de date utilizat la reprezentarea săgeților este cel ales pentru randarea 2D a vectorilor.
În mod similar, culoarea săgeților este definită în setările randării 2D a setului de date vectorial.
În setările 3D, utilizatorul poate defini distanța dintre săgeți și dacă dimensiunea este fixă sau scalată.
Această setare de spațiere definește, de asemenea, dimensiunea maximă a săgeților, ele neputându-se suprapune.
Această funcționalitate a fost dezvoltată de Lutra Consulting (Vincent Cloarec)
Această caracteristică adaugă elementelor unei compoziții o nouă secțiune, care permite activarea și stabilirea intervalului temporal de utilizat la momentul randării conținutului hărții.
Valorile amprentelor temporale de început și de final pot fi definite prin intermediul datelor, ceea ce este foarte util la utilizarea împreună cu entitățile atlasului.
Această funcționalitate a fost finanțată de iMHere Asia
Această funcționalitate a fost dezvoltată de Mathieu Pellerin
În locul folosirii aceluiași model de date pentru afișarea coloanelor și pentru sortare, de acum se utilizează două modele de date. Acestea folosesc aceeași clasă de bază / API, întrucât sunt asemănătoare.
Această funcționalitate a fost dezvoltată de Denis Rouzaud
Acest lucru permite utilizatorilor să suprascrie manual setarea implicită de „divizare” strat-după-strat din legendă, făcând dublu clic pe unul din straturile din panoul legendei compoziției și specificând dacă acel strat:
Respectă setarea implicită pentru divizarea legendei
Poate fi ÎNTOTDEAUNA împărțit în mai multe coloane (indiferent de setarea legendei)
sau
NICIODATĂ nu poate fi împărțit în mai multe coloane (indiferent de setarea legendei)
Sponsorizat de SLYR
Această funcționalitate a fost dezvoltată de: Nyall Dawson
De acum, este posibilă personalizarea simbolurilor diviziunilor și subdiviziunilor, separat de simbolul bării orizontale a scării
Sponsorizat de SLYR
La baza acestei dezvoltări stau eforturile depuse de @agiudiceandrea!
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Această caracteristică permite utilizatorilor personalizarea (opțională) a simbolului unui nod al legendei, modificându-i, de exemplu, culorile sau dimensiunile, în scopul obținerii unui simbol corectat, „reprezentativ”, diferit de cel pe care îl au pe hartă entitățile.
Funcționalitatea este utilă pentru exagerarea lățimii simbolurilor sau pentru reglarea manuală a culorilor simbolurilor semitransparente, în așa fel încât culorile să redea aspectul real al simbolurilor, la afișarea în partea superioară a hărții. Sau, se poate ajusta intervalul/compensarea liniilor simbolurilor, astfel încât acestea să fie bine distanțate în cadrul legendei.
Această funcționalitate a fost dezvoltată de: Nyall Dawson
La configurarea unui articol din legendă a apărut opțiunea de plasare a unui sfârșit de coloană înaintea elementului, determinând poziționarea acestuia într-o coloană nouă.
Această caracteristică permite utilizatorului să preia controlul asupra conținutului coloanei, în cazurile în care generarea automată a coloanelor nu oferă rezultatele așteptate.
Această funcționalitate a fost dezvoltată de: Nyall Dawson
S-a adăugat capacitatea de creare a subdiviziunilor pentru segmentele incluse în partea dreaptă a scării grafice.
Gradații în Zona Superioară
Gradații la Mijloc
Gradații în Zona Inferioară
Proprietățile bării scării grafice - Grupul de casete al segmentelor
Comportamentul segmentelor din partea stângă a scării a rămas neschimbat.
Această funcționalitate a fost dezvoltată de Andrea Giudiceandrea
Allows users to override the symbol patch size for individual legend nodes, by double clicking the node
Width and height can be individually overridden, with the node falling back to the default width or height when the override isn’t set.
Sponsorizat de SLYR
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Gives flexibility to allow „nesting” legend groups/subgroups/symbols and much greater control over legend item placement.
Sponsorizat de SLYR
Această funcționalitate a fost dezvoltată de: Nyall Dawson
This update finalises the recent legend patch shape customisation work, by adding in support for custom legend patch shapes to style manager!
Now we just need a really nice set of default patch shapes to ship!!
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Allows users to set custom legend patch shapes for items by entering a WKT string representing the patch geometry.
Sponsorizat de SLYR
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Embeds the pasted picture into the layout.
Această funcționalitate a fost dezvoltată de: Nyall Dawson
This allows creation of north arrows from marker symbols, exposing the same options as exist for picture items acting as north arrows.
When a marker acts as a north arrow, the map rotation is ADDED to any existing marker symbol rotation (e.g. if you have to rotate the triangle marker 90% to get it pointing straight up, it will still work nicely in north arrow mode!)
Sponsorizat de SLYR
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Allows marker symbols to be placed directly on layouts, e.g. for manually placing markers over a map item or for creation of advanced custom legends.
Previously you had to hack support for these, e.g. by drawing rectangles using centroid fill symbols. Much nicer to have a dedicated item type for it, allowing more specific customisation options (coming soon!)
Sponsorizat de SLYR
Această funcționalitate a fost dezvoltată de: Nyall Dawson
A new import content from clipboard feature has been added to QGIS» table editor to enable quicker layout fixed table item editing and creation.
Această funcționalitate a fost finanțată de iMHere Asia
Această funcționalitate a fost dezvoltată de Mathieu Pellerin
This style represents decimal numbers as vulgar fractions, e.g. „3/4” instead of 0.75.
Options include using Unicode superscript and subscript characters for nicer typography, e.g. ¹⁷/₂₃ (this is the default mode, disabling this option uses the „17/23” format). An option also exists for using dedicated unicode characters for specific fractions (where a unicode character exists), e.g. ½ or ¾.
Ultimately this allows for creation of scalebars with fractional representations of distances, e.g. 0 —– ½ —– 1 km (instead of 0 —— 0.5 —— 1km)
Sponsorizat de SLYR
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Adds two new scalebar styles (which are available in ArcMap, but previously impossible to reproduce in QGIS)
Stepped line style:
Hollow (aka „South African”) style:
Sponsorizat de SLYR
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Instead of the previous settings of scalebar line color/width/cap styles, we now expose the option as a full line symbol for more advanced styling.
Also some code cleanups.
Sponsorizat de SLYR
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Adds an explicit choice between SVG or raster image sources, which allows us to clean up the configuration panel for layout pictures by hiding options which don’t apply to a certain picture source. Also permits us to:
Reuse the standard SVG selector tree widget, which loads images in a background thread
Uses the standard SVG and image selector line edit, which permits drag and drop of images and exposes options to embed images and link to online sources
Ultimately this is motivated by a desire to allow users to embed images in layouts and layout templates
Sponsorizat de SLYR
Această funcționalitate a fost dezvoltată de: Nyall Dawson
This makes the Map CRS controllable by a variable.
Ține de #34547
Această funcționalitate a fost dezvoltată de Alex
ascii
make_interval
Allows direct construction of interval values from years/months/weeks/days/hours/minutes/second values, without having to construct a string representation of the interval first
maptip
layer_property('distance_units')
display_expression
eval_template
make_date
make_time
make_datetime
close_line
is_multipart
geometry Z and M minimum and maximum
@frame_number
@frame_rate
@frame_duration
@map_start_time
Start of the map’s temporal time range (as a datetime value)
@map_end_time
End of the map’s temporal time range (as a datetime value)
@map_interval:
Duration of the map’s temporal time range (as an interval value)
@animation_start_time
@animation_end_time
Această funcționalitate a fost dezvoltată de Etienne Trimaille, Jan Caha, Julien Monticolo, Nyall Dawson
This adds a feature browser to the expression builder so one can browse features to see the result of the expression
A new widget is added: QgsFeaturePickerWidget
. For the moment, it’s a simple combobox (but inherits widget so we can add a map picker button later on). It behaves the same way than the one in the relation reference widget (an editable combobox).
It relies on the same base model (QgsFeatureFilterModel
). A new abstract class QgsFeaturePickerModelBase
regroups the logic of the, and the new model is called QgsFeaturePickerModel
. Basically the QgsFeaturePickerModel
used the feature id to identify the features while QgsFeatureFilterModel
use a list of attributes (the foreign keys of a relation). It declutters a bit the former model which was quite…cluttered.
As a side note, I tried to use templates for QgsFeaturePickerModelBase
, but since templates cannot be mixed with Q_OBJECT, the alternatives sounded like the code would be less readable.
Tests have been added.
Sponsorizat de Grupul Utilizatorilor Elvețieni de QGIS!
Această funcționalitate a fost dezvoltată de Denis Rouzaud
Adds a remove button to the Functions Editor tab in the Expression builder dialog to allow the removal of user functions from QGIS without needing to navigate to the user profile directory.
Această funcționalitate a fost dezvoltată de Alexander Bruy
A new button is added that allows editing of saved expressions. It is only active when a user expression is selected in the expressions tree. When pressed, it opens a window that allows the currently selected user expression to be edited. Changing the label of the expression makes a copy of the currently existing one. Demo
Import/Export
A new button with a menu is added, that allows the import/export of user expressions to/from a JSON file. Clicking on either of the menu entries opens a file selector dialog for the expressions JSON file source/destination. In the case of label conflicts, an additional dialog asks how to proceed - either to overwrite or to skip the current expression. Import/Export Demo
Această funcționalitate a fost dezvoltată de Ivan Ivanov
This version of QGIS comes with a new dedicated avoid geometry intersection/overlap mode setting when digitizing features.
Allow intersections/overlaps
Avoid intersections/overlaps on active layer
Avoid intersections/overlaps on user-defined layers list.
The third mode’s layers list is setup by the user via the advanced snapping configuration widgets.
Această funcționalitate a fost finanțată de OpenGIS.ch
Această funcționalitate a fost dezvoltată de Mathieu Pellerin
This feature is aimed at improving snapping modes in QGIS by getting closer to the experience of CAD tools.
It adds two new modes. Snapping on the center of a geometry (centroid) and the middle of a segment.
To allow the selection of these new modes, several snapping modes can be selected at the same time.
The order of preference for snapping is as follows: - Vertex, Intersection - Middle - Centroid - Edge - Area
Sponsored by: Qwat group / Ville de Lausanne ( @ponceta @dsavary ) / Oslandia and some spare time
Această funcționalitate a fost dezvoltată de lbartoletti
Snapping can now also supports snapping to the feature currently being digitised. This option is enabled/disabled a new button in the snapping toolbar.
This enables some really nice CAD-like editing abilities, such as closing features at a 90° angle or precisely aligning segments inside a feature. It’s very efficient once one is accustomed to using the alt+a shortcut to lock the angle.
Această funcționalitate a fost finanțată de Kanton Solothurn și Land Vorarlberg
Această funcționalitate a fost dezvoltată de Olivier Dalang
The tracing tool now creates curved geometries when working on a layer that supports curved geometries.
The support is still experimental, so this feature must be enabled in the digitizing options.
Această funcționalitate a fost finanțată de ecoptima și Planteam
Această funcționalitate a fost dezvoltată de Olivier Dalang (OPENGIS.ch)
In a form, links can now be edited in the file widget (when the widget is not readonly).
Sponsored by the QGIS Swiss user group
Această funcționalitate a fost dezvoltată de Denis Rouzaud
This new feature allows form labels (aliases) to be evaluated in the form context.
Această funcționalitate a fost finanțată de ARPA Piemonte
Această funcționalitate a fost dezvoltată de Alessandro Pasotti
Adds an option for adding a description to each value in a value relation widget. The description will show up as tooltip
Please excuse the different languages in the demo video.
Această funcționalitate a fost dezvoltată de Matthias Kuhn
A new widget was added to QGIS to select a new table from an existing DB connection:
Această funcționalitate a fost dezvoltată de Alessandro Pasotti
This feature adds the option of using current values from the „parent” form in filter expressions (for now only in value-relation widgets: to be used in drill-down filters).
A new „parentForm” scope was added as well as a new set of functions and variables to access the parent from within an embedded child form. The new functions and variables were modelled on the existing „current_value”, „current_feature” etc.
The new functions and variables are also available when the parent form is opened from a new (unsaved, unbuffered) feature, making it easier to create drill-down filters based on the parent’s values when adding children from an unsaved parent form.
Finanțare: ARPA Piemonte
Această funcționalitate a fost finanțată de ARPA Piemonte
Această funcționalitate a fost dezvoltată de Alessandro Pasotti
Adds an option to the relation widget configuration to suppress form popup open when new features are added in an embedded form context.
This option overrides the form-level option (that might still be the desired behavior when the form is used as a standalone form).
Note: the final label is Force hide form on add feature
Această funcționalitate a fost finanțată de ARPA Piemonte
Această funcționalitate a fost dezvoltată de Alessandro Pasotti
This adds the option of renaming a map theme from the map theme drop-down menu.
Această funcționalitate a fost dezvoltată de Harrissou Sant-anna
Adds some more useful tools to the network logger:
Copiere adresă
Copy request as JSON
Save log to file (after a big warning to users that the log may contain sensitive information and should be treated as confidential)
Această funcționalitate a fost dezvoltată de: Nyall Dawson
This tool, which is available from the new F12 „dev tools” panel, is a native port of @rduivenvoorde’s network logger plugin.
It shows a list of ongoing and completed network requests, along with a whole load of useful detail like request and reply status, headers, errors, SSL configuration errors, timeouts, cache status, etc.
Also has loads of polish and useful capabilities, such as the ability to filter requests by URL substrings and status, and you can right-click requests to open the URL in a browser or copy them as a cURL command.
Why do we want this as a native tool instead of a plugin? Well:
It’s extremely useful, so is nice to have available out-of-the-box
By moving it to c++, we can startup the logging process much earlier than a plugin gets the opportunity to. This allows the log to include additional information, such as requests fired off by other plugins which occur before the network logger plugin has been loaded (also other in-built requests, e.g. news feed)
Performance has been an ongoing struggle with the Python plugin. While this is about as close as a 1:1 port as you can get, the performance issues have all been magically solved. The classes have some very intensive list operations, which is likely the cause of the poor performance under Python.
Această funcționalitate a fost finanțată de Serviciul Meteorologic din Canada
Această funcționalitate a fost dezvoltată de Nyall Dawson (for Kartoza)
With this feature we added a large collection of random number raster generation algorithms. The algorithms are capable of outputting random rasters following specific random number distributions. The following distributions are available:
Creare strat raster aleator (distribuție binomială)
Creare strat raster aleatoriu (distribuție exponențială)
Creare strat raster aleator (distribuție gamma)
Creare strat raster aleator (distribuție binomială negativă)
Creare strat raster aleatoriu (distribuție normală)
Creare strat raster aleatoriu (distribuție poisson)
Creare strat raster aleator (distribuție uniformă)
Această funcționalitate a fost dezvoltată de Clemens Raffler
This feature adds Processing integration for vector tile writing. It is just a wrapper around the existing QgsVectorTileWriter class.
Noi algoritmi în trusa instrumentelor de Procesare:
Algorithm’s parameters for XYZ:
Algorithm’s parameters for MBTiles:
List of input layers:
Input layer details:
Această funcționalitate a fost finanțată de Comunitatea QGIS
Această funcționalitate a fost dezvoltată de Lutra Consulting (Martin Dobias)
This algorithm allows users to setup multiple conditions (via qgis expressions), which cause their corresponding branch of the model to be run or skipped depending on the result of the expression evaluation.
Această funcționalitate a fost finanțată de Andreas Neumann
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Instead of forcing a quasi-random ordering of inputs for models, this feature exposes a new „Reorder Model Inputs” option in the model designer which allows users control over the exact order of inputs to show users for their model.
No more illogical ordering like showing a field choice before the layer choice it’s based on!
Sponsorizat de NaturalGIS
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Instead of forcing all child algorithms to be immediately valid and have all parameters correctly filled, this feature defers model validation until run time or when a new „Validate model” action is triggered.
A common frustration with the QGIS model designer is that it constantly forces models to be valid, even work-in-progress models. This means it’s impossible to add a component to a model and only partially populate its settings — you have to fill in everything upfront. If you realise mid way through this that you need to make a change somewhere else in your model, it’s impossible to do without canceling and losing all the settings you’ve already configured.
This change sees the model validation deferred until run time. Models can be temporarily invalid (e.g. having algorithm components which are only partially configured). The missing required values can now be filled at a later stage, without losing any existing settings. If a non-valid model is run, the user gets a descriptive warning informing them of the changes they need to make in order to finish configuration of the model.
Această funcționalitate a fost dezvoltată de: Nyall Dawson
With this feature we added a new advanced OUTPUT_TYPE parameter for the Create constant raster layer algorithm. Via this parameter, you can now specify an output data type for your constant raster layers.
Octet
Integer16
Integer16 Nesemnat
Integer32
Integer32 Nesemnat
Float32
Float64
Această funcționalitate a fost dezvoltată de Clemens Raffler
With this new processing algorithm we enable QGIS to round Raster values.
The main functionality of the algorithm is either standard up/nearest/down-rounding of floating point cell values or rounding to powers of a user specified base n. The algorithm can be used with rasters of all types (even byte/integer rasters when rounding to powers of n) and outputs the same raster data type. A standard floating point rounding of an integer raster will copy it and raise a warning.
The example shows an output raster rounded to multiples of 10
Această funcționalitate a fost dezvoltată de Clemens Raffler
This feature allows users to copy and paste model components, both within the same model and between different models
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
When appending results, users are given a field mapping panel choice to allow them to manually set how fields are mapped to the destination layer’s fields:
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Adds the following functions to the model designer:
The ability to customise the color of individual comments in a model
Allow creation of „Group Boxes” in models, which are a visual indicator of logically linked model components (e.g. «Data Preparation Steps», «NDVI Calculation Steps», … etc). Users can customise the color and title for group boxes.
Allow navigation direct to group boxes from the View menu, aiding navigation of complex models.
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
A picture explains this best! After running the algorithm through the designer, you now see the values calculated for the inputs and outputs for each child algorithm:
This is very useful for debugging models – you can see a much clearer visual picture of the flow of values through the model.
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
This algorithm saves the contents of the execution log (right up to the point in the model at which the «save log» algorithm executes) to a file.
It can be used to automatically store the debugging log when running models for later reference and transparency.
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
This change allows users to directly browse to non disk-based layer sources for any processing feature source inputs. It allows these inputs to be taken direct from postgres, sql server, oracle, wfs, afs, etc layers directly without having to first load them into a project!
We take full advantage of the QGIS browser to enable this:
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
This feature exposes per-feature-source advanced options, such as:
The ability to limit the number of features read from the source. (Useful in model development, you can easily test run models using a small subset of an input layer)
The ability to override on a per-input basis the global processing option for how to handle invalid geometries. Now you can safely leave the default processing setting at the conservative „Stop algorithm execution when a geometry is invalid” setting while easily temporarily overriding this for one particular input!
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
This update implements two „snapping” features in the Processing model designer:
Users can enable a new „Enable Snapping” option from the view menu, which will cause all component moving or resizing operations to automatically snap to grids
After selecting some components, users can select Edit -> Snap Selected Components to Grid to manually snap just those selected components.
Additionally, I’ve added a helpful „select all” action for quickly selecting all components in a model.
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
This update adds two new algorithms to processing:
„Filter by geometry type”: This algorithm filters features by their geometry type. Incoming features will be directed to different outputs based on whether they have a point, line or polygon geometry. It allows for model creation which responds to different input layer geometry types by applying different logic depending on the input geometry type.
„Filter by layer type”: This algorithm allows conditional model branching based on an input layer type. For instance, it allows a model to adapt to the actual layer type of a generic „map layer” parameter input, and decide which branch of the model to run as a result.
It also adds in the required API to allow algorithms to „prune” model branches based on their calculated results. For example, a model which returns the new FlagPruneModelBranchesBasedOnAlgorithmResults flag will cause any remaining parts of the model which are dependent on the outputs of that algorithm to be entirely skipped IF the algorithm does not return that particular output. (This is a prerequisite component for a future generic „conditional branching by expression” algorithm, and also used by „filter by layer type” to control the model flow based on the input layer type)
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Empty geometries do not contain coordinates. Thus, like null geometries, empty geometries are not spatial data in a strict sense. To make it easier for users to clean a vector layer, the Remove Null Gometries algorithm now has an „Also remove empty geometries” option.
Această funcționalitate a fost finanțată de SwissTierras Colombia
Această funcționalitate a fost dezvoltată de Germán Carrillo
Adds:
The ability to select multiple items at once in the model designer
The ability to resize individual or multiple items
The ability to delete multiple selected items
Improved model designer „tool” interaction, following the layout designer approach (e.g. alt + space = zoom drag mode, and selection tools follow their counterparts in layouts so shift+selection adds to selection, ctrl+selection removes, etc)
Selected items can be moved by the cursor keys
Refs NRCan Contract#3000707093
Here’s how it looks in action (with a particular ugly looking test model I use!)
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Makes QGIS more forgiving for users!
Refs NRCan Contract#3000707093
Works just like you’d expect:
Note that we save the whole model definition in the undo stack, not just the affected component changes.
Această funcționalitate a fost dezvoltată de: Nyall Dawson
When designing a model, users typically will need to run the model many times as they tweak its structure.
This change causes the parameters used when running the model from the designer to be remembered and saved into the model, so that each time you run the model from the designer you don’t have to re-set all the input parameter values to the desired test ones.
Makes iterative model design SO much easier!
Sponsored by Alta Ehf
Also includes a partial port of the model designer dialog from Python to c++, because c++ >> Python.
Această funcționalitate a fost dezvoltată de: Nyall Dawson
This allows users to create comments attached to model components (inputs, algorithms or outputs). Comments are shown linked to the associated component, and can be freely moved around the model.
Funded by Fisel + König
Această funcționalitate a fost dezvoltată de: Nyall Dawson
This new qgis_process tool allows users to run processing algorithms (both built-in, and those provided by plugins) directly from the console.
Running:
qgis_process list
will output a complete list of all available algorithms, grouped by provider.
qgis_process plugins
lists available and activated plugins which advertise the hasProcessingProvider metadata option (only these plugins are loaded by the tool)
qgis_process help algid
outputs the help and input descriptions for the specified algorithm, e.g. qgis_process help native:centroids
qgis_process run
: runs an algorithm. Parameters are specified by a --param=value
syntax. E.g.
qgis_process run native:centroids --INPUT="my_shapefile.shp" --OUTPUT="centroids.kml"
sau
qgis_process run native:buffer --INPUT=/home/me/my.shp --DISTANCE=20 --OUTPUT=/home/me/buffered.shp
While running an algorithm a text-based feedback bar is shown, and the operation can be cancelled via CTRL+C
Sponsored by the Swedish User Group
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Adds a new parameter type QgsProcessingParameterDateTime for handling date/datetime/time values.
Această funcționalitate a fost dezvoltată de: Nyall Dawson
These algorithms raise either a custom warning in the processing log OR raise an exception which causes the model execution to terminate.
An optional condition expression can be specified to control whether or not the warning/exception is raised, allowing logic like „if the output layer from another algorithm contains more than 10 features, then abort the model execution”.
Sponsored by Fisel + König
Această funcționalitate a fost dezvoltată de: Nyall Dawson
In the new QGIS version we introduce a new processing algorithm for filling NoData cells in a raster dataset with a constant numerical input.
The algorithm scans an input raster dataset for NoData cells and fills them with the user defined fill value. Doing so, the algorithm respects the data type of the input raster so that e.g. floating point numbers will be dealt with appropriately for an integer raster. The resulting dataset will not contain any NoData cells.
Această funcționalitate a fost dezvoltată de Clemens Raffler
Finalize work on range parameters support in GRASS algorithms;
Fix broken r.series algorithm
Minor fixes to r.rescale and r.rescale.eq
Fix for rasterize tool
GRASS GIS tests cleanup
Această funcționalitate a fost dezvoltată de Alexander Bruy
When you are migrating data, it is important to be aware of constraints on target (a.k.a. template) layers.
The „Refactor Fields” algorithm now highlights constraints, and even lets you know more about them via tool-tips.
Această funcționalitate a fost finanțată de SwissTierras Colombia
Această funcționalitate a fost dezvoltată de Germán Carrillo
We added a new algorithm to convert segmentized geometries to curved geometries.
The algorithm considers successive points to represent a curve if they are evenly spaced and within a tolerance.
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Add @layers, @layer_ids project scope variables which contain lists of map layers and map layers ids for all layers from the current project
This mimics the existing @map_layers, @map_layer_ids, but unlike the @map variants these return ALL project layers, not just those associated with the current context’s map settings.
Sponsorizat de SLYR
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Allows the user to add attributes directly in the New Scratch Layer dialog making it more consistent with other dialogs like New Shapefile/Geopackage.
It is still possible to create a scratch layer without any attributes by not adding any fields to the list.
Această funcționalitate a fost dezvoltată de Alexander Bruy
Allow creating „plain” DBF files without associated geometries from the New Shapefile dialog.
Creating DBF tables can be useful in some cases and having to use third-party tools for this instead of doing it from within QGIS is inconvenient. This also makes the New Shapefile dialog more consistent with the New Geopackage dialog, which already allows „geometryless” tables to be created.
Această funcționalitate a fost dezvoltată de Alexander Bruy
Add ability to filter between lists of WMS or WMTS from the source dialog
WMS
WMTS
Sponsored by the QGIS Swiss user group
Această funcționalitate a fost dezvoltată de Denis Rouzaud
Add missed import/export functionality for ArcGIS MapServer and FeatureServer connections.
Această funcționalitate a fost dezvoltată de Alexander Bruy
Transactions implementation for the native SpatiaLite provider.
Această funcționalitate a fost finanțată de ARPA Piemonte
Această funcționalitate a fost dezvoltată de Alessandro Pasotti
This update allows users to save processing vector outputs directly to more database formats.
Previously outputs could only be written directly to postgres databases. With this change, this functionality has been made more flexible and now supports direct writing to any database provider which implements the connections API (currently postgres, geopackage, spatialite and sql server)
Ultimately this exposes the new ability to directly save outputs to SQL Server or Spatialite databases (alongside the previous GPKG+Postgres options which already existed)
(As soon as oracle, db2, … have the connections API implemented we’ll instantly gain direct write support for those too!)
We do this via a nice inline version of the new „new database table name” widget.
Other nice stuff includes:
You can now drag and drop file or folders from explorer or the qgis browser to output parameters in order to easily overwrite these files (or save to the folder), matching the behavior possible with inputs
You can actually write scripts which output direct to ANY qgis data provider (including oracle and db2)… it’s just that these don’t get exposed in the UI because they don’t yet support the connections API
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Allows selection from the registered database connections for a specific database provider type (the provider must implement the connections API).
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Expose foreign tables to the browser and data source select dialog.
Această funcționalitate a fost dezvoltată de Alessandro Pasotti
This should be the final change to the PG raster data provider and exposes the set filter options:
Filter can be set in the data source dialog (as for vector layers)
Filter can be set from the legend tree’s context menu (as for vector layers)
The renderer, the extent and the min/max stats are also updated when the filter changes
New tests for the new behavior
Această funcționalitate a fost finanțată de ARPA Piemonte
Această funcționalitate a fost dezvoltată de Alessandro Pasotti
Allow updating/inserting features in PostgreSQL tables with generated fields. GENERATED columns is a feature introduced by PostgreSQL 12, which allows column values to be generated from other columns in the same table; this replaces the creation of triggers to, for instance, automatically populate and keep up-to-date a column of centroids or areas for the polygons in the main geometry column.
Această funcționalitate a fost dezvoltată de José de Paula Rodrigues N. Assis
The Spatialite and Delimited Text providers now support Date and DateTime field types.
Această funcționalitate a fost dezvoltată de Mathieu Pellerin
Allows the overriding of the default behavior in the case of bad layers (which is to invalidate the whole project).
When set to TRUE, bad layers are skipped and the remainder of the project becomes available.
Această funcționalitate a fost finanțată de Biroul de Geoinformatică Dassau GmbH
Această funcționalitate a fost dezvoltată de Alessandro Pasotti
In addition to the «visible» and «mutuallyExclusive» attribute, this update adds «expanded» to the GetProjectSettings response of the server. The update allows a web client to see which layer tree elements are expanded / collapsed and to then present them the same way in the web map layer list.
Această funcționalitate a fost dezvoltată de mhugent
QGIS server now supports the new parameters NO_MTEXT
and FORCE_2D
to control text and line symbology for generated DXF files.
Adds missing parameters to GetDxf request.
Această funcționalitate a fost dezvoltată de Matthias Kuhn
The QGIS Server validator has been reviewed. This tool is useful when you want to publish a QGIS project using the WMS protocol.
For programmers, the validator is also now callable from PyQGIS, so plugins can now use it too.
Această funcționalitate a fost finanțată de 3Liz
Această funcționalitate a fost dezvoltată de Etienne Trimaille
WebP is a modern image format that provides superior lossless and lossy compression for images on the web. WebP creates smaller, richer images that make the web faster.
WebP lossless images are 26% smaller in size compared to PNGs. WebP lossy images are 25-34% smaller than comparable JPEG images at equivalent SSIM quality index.
Sursa: https://developers.google.com/speed/webp
With webp QGIS server now supports a format that provides smaller file sizes for the same quality and even provides transparency.
Această funcționalitate a fost finanțată de OPENGIS.ch
Această funcționalitate a fost dezvoltată de Matthias Kuhn (OPENGIS.ch)
These allow plugins to extend the „Open Project” dialog by adding in support for new file filters, which appear in the formats drop down list alongside the existing „QGS Projects” entry.
Custom project open handlers then get first chance at loading project files.
This allows plugins to extend QGIS support by adding integrated support for opening projects from non QGS/QGZ formats, e.g. allowing users to open ArcGIS MXD documents or MapInfo WOR Workspaces direct from the project open dialog.
These non-native projects are also added to the recent projects list and welcome screen, giving them a truly first-class experience within QGIS.
Sponsorizat de SLYR
Această funcționalitate a fost dezvoltată de: Nyall Dawson
This update improves the plugin manager by allowing users to choose between installing the stable or the experimental version of a plugin.
This makes it possible to have pre-releases of plugins in the repository for power-users to test, while still allowing them to switch back easily to stable versions, without having to untick the global enable experimental option.
This change makes no difference for users who haven’t checked the enable experimental option.
Această funcționalitate a fost finanțată de Grupul Utilizatorilor Elvețieni de QGIS
Această funcționalitate a fost dezvoltată de Olivier Dalang
Dock widgets are great for displaying complex interfaces that extend QGIS functionality.
Now, both core and plugin devs have the option to tabify their dock widgets on top of existing ones. They can even choose on top of which dock widget they want their own dock widget appear.
Această funcționalitate a fost finanțată de SwissTierras Colombia
Această funcționalitate a fost dezvoltată de Germán Carrillo
Ports the output parameter wrappers (sinks, vector, raster, file and folder destinations) to the new c++ API for dialog and modeler.
This allows a range of new possibilities, including:
Models with static outputs for child algorithms, e.g. always saving a child algorithm’s output to a geopackage or postgres layer
Models with expression based output values for child algorithms, e.g. generating an automatic file name based on today’s date and saving outputs to that file
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
This update ports the Raster Band input parameter and Multi Layer input parameter to the new C++ API.
Benefits include:
Expression based band/layer lists in models
Inline (non-blocking) lists for multi selection parameters (fields, bands, layer lists, enums)
Rearrangement of inputs for multi-layer parameters in models, to set specific layer orders
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
It’s now possible to use expression-based layer sources in processing models.
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
This is the initial work on vector tile layer support.
(Liniile roșii nu reprezintă artefacte de redare, ele sunt desenate în mod intenționat pentru a indica marginile plăcuțelor.)
So far this only includes changes to the qgis_core library.
Main additions to the public API:
QgsVectorTileLayer - the main map layer class
QgsVectorTileRenderer - base class for renderer class implementations for vector tiles
QgsVectorTileBasicRenderer - default renderer implementation
New private classes (may be added to public API if needed):
QgsVectorTileLoader - handles fetching of tiles from network / mbtiles
QgsVectorTileMVTDecoder - handles decoding of raw tile data to features
QgsVectorTileLayerRenderer - takes care of overall rendering (fetch + decode + draw)
QgsVectorTileUtils - various useful functions
Some new classes that may be shared by vector and raster tiles:
QgsTileXYZ - position of a tile in tile matrix set (zoom level, column, row)
QgsTileRange - rectangular selection in a tile matrix (start/end column and row)
QgsTileMatrix - description of a tile matrix (map extent, zoom level, scale, number of rows/columns)
(also QgsTileMatrixSet to be added later when we support other tile matrix sets than just GoogleCRS84Quad)
You can load a vector tile layer from Python console, e.g.:
ds = QgsDataSourceUri() ds.setParam("type","xyz")
ds.setParam("url", "https://api.maptiler.com/tiles/v3/{z}/{x}/{y}.pbf?key=YOUR_FREE_API_KEY")
uri = bytes(ds.encodedUri()).decode('utf-8')
vtl = QgsVectorTileLayer(uri, "Vector Tiles Test")
QgsProject.instance().addMapLayer(vtl)
It is also possible to load vector tiles from a local MBTiles file - for „type” use „mbtiles” and for „url” use a local path (e.g. „/home/martin/x.mbtiles”).
There is currently no support for labeling.
Huge thanks to all funders who have contributed to the crowdfunding and made this possible - https://www.lutraconsulting.co.uk/blog/2020/04/02/vectortiles-donors
Această funcționalitate a fost finanțată de Comunitatea QGIS
Această funcționalitate a fost dezvoltată de Lutra Consulting (Martin Dobias)
This update ultimately ports the extent parameter to the new c++ api, but along the way it:
Refactors the existing gui widget „QgsExtentGroupBox” to move the guts out to „QgsExtentWidget” (allowing it to be used in places where a group box is inappropriate/looks bad). It also adds a new „condensed” mode for the widget, because the default appearance is very space heavy.
The new parameter widget utilises this common QgsExtentWidget, so that we remove all the duplicate code which was previously used by the old python wrapper
Allows drag and drop of project map layers from the layer tree to a QgsExtentWidget to auto-set the extent to match
Allows QgsExtentWidget to be optionally nullable
Allows QgsGeometry values to be set for extent parameter values. This is done to aid use of extent parameters with the „precalculated value” mode in models – you can now use all the expression geometry functions to calculate a geometry and the bounding box of this is used for the parameter value in the child algorithm
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Adds interface hooks to allow plugins (and c++) to register „development/debugging” tools
These tools appear in a new Development/Debugging Tools dock, and provide a unified handling and place for these tools in the UI.
The intention here is that specialised development/debugging tools will be moved to this common interface, e.g.
Network logger
First aid style Python local variables inspector
Startup time debugging tools
Layer load and rendering time debugging tools … ?
Here’s an example demo showing a „Python locals” dev tool:
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Allow the definition of accepted layer types for QgsProcessingParameterMapLayer
. This is useful when an algorithm can work with different layer types (for example, points and rasters) and avoids duplication of the same algorithm with different inputs.
This is an API improvement and is not visible for the vast majority of users.
Această funcționalitate a fost dezvoltată de Alexander Bruy
Replaces the previous ad-hoc Python postgis widget wrappers with proper first class c++ dedicated parameters for schemas and tables, with wrappers built off the core connections api.
Refs NRCan Contract#3000707093
Această funcționalitate a fost dezvoltată de: Nyall Dawson
Titlul Erorii |
URL issues.qgis.org (dacă a fost raportată) |
URL Commit (Github) |
3.10 backport commit (GitHub) |
---|---|---|---|
Getfeatureinfo does not show relation reference items for QGIS Server |
Turned out to be a feature request |
N/A |
|
OGR provider QgsOgrProvider::changeAttributeValues returns true on errors |
N/A |
||
GPKG transaction groups are stored with empty second pair of the key |
|||
Symbology using relations does not propagate in QGIS Server |
nu se poate reproduce |
N/A |
|
„Loading PostGIS raster with QGIS 3.12.3 crashes” |
nerelevant |
||
GetFeatureInfo Fid value is different between application/json and application/vnd.ogc.gml |
|||
GPKG (and spatialite) DB-level unique constraints are not supported by OGR (and spatialite) provider |
N/A |
||
no value in the attribute form if value missing in the value map |
N/A |
||
DB Manager does not show anymore query results |
N/A |
||
DB Manager does not show anymore query results |
N/A |
||
GPKG browser drag&drop not working |
neraportat |
||
it is not possible to save a project in the geopackage |
N/A |
||
It is possible to store text into a numeric field, while it shouldn’t be, using the Date/Time edit widget |
N/A |
||
Feature creation very slow when using joins |
N/A |
||
QGIS Server: WFS Request does not use SrsName on the geometry |
non critic |
||
Unable to delete a stored geopackage connection from browser |
|||
Constraints: unique constraint not correctly evaluated when 0 |
N/A |
||
PyQgis: OriginJoin fields arte not present into QgsLayerVector QgsFields container for GeoPackage layers |
nereproductibil |
N/A |
|
Joined tables cannot be edited even if the „editable join layer” option is checked |
not reproducible/in progress |
N/A |
|
Removal of unused «allowMethod» from qgisservice/qgisserverapi |
N/A |
||
Omogenize window title |
N/A |
||
Labeling: data-defined alignment grey-out activation issue |
|||
QGIS reports „no layers” in GeoPackage when geopackage directory is write protected |
not critical (UX only) |
||
Joined tables cannot be edited even if the „editable join layer” option is checked |
won’t fix |
N/A |
|
Postgis Timestamps from query in DB Manager displayed as `PyQT5.QTCore.QDateTime(2020, 3, 17 |
N/A |
||
Wrong image preview and image preview size in form |
|||
can’t change value in vertex editor if „locale” settings use commas as decimal separator |
|||
Identifying a WMS layer with format „feature” crashes QGIS |
|||
Attempting to create a new feature in Spatialite with transaction group and NOT NULL constraint fails |
won’t fix |
N/A |
|
Using „Add feature” to create feature and child feature with transaction group causes foreign key error |
non critic |
||
Vectorlayer from spatialite missing features and inconsistent feature count |
DE EFECTUAT |
Această funcționalitate a fost finanțată de QGIS.ORG (Prin programul de donații și susține)
Această funcționalitate a fost dezvoltată de Alessandro Pasotti
Titlul Erorii |
URL issues.qgis.org (dacă a fost raportată) |
URL Commit (Github) |
3.10 backport commit (GitHub) |
---|---|---|---|
Fix error when vector layer has Z |
|||
Fix rectangle from 3 points |
|||
Allow to search qmlplugindump in different paths |
N/A |
N/A |
|
Fix the absence of words in the advanced configuration widget |
PR #35643#issuecomment-610215386 |
N/A |
|
Fix interpolation on split geometry |
N/A |
Această funcționalitate a fost finanțată de QGIS.ORG (Prin programul de donații și susține)
Această funcționalitate a fost dezvoltată de Loïc Bartoletti
Titlul Erorii |
URL issues.qgis.org (dacă a fost raportată) |
URL Commit (Github) |
3.10 backport commit (GitHub) |
---|---|---|---|
Wrong interpretation of EPSG code from a PRJ file in QGIS-dev (proj v7.1.0) |
N/A: PROJ issue |
||
QGIS crashes when adding file to geopackage -> layer -> field(BLOB) |
|||
Bad error message on WFS connection fail |
|||
QGIS crashes during map re-rendering after CRS switch |
nu se poate reproduce |
N/A |
|
QGIS crashes when „open directory” is selected from the recent projects contextual menu |
|||
Problem reprojecting rasters in 54019 and 54042 CRSs |
N/A: PROJ issue |
||
WFS Provider WARNING - Cannot create temporary SpatiaLite cache when using flatpak install |
N/A |
||
WFS Transaction operation using GetCapabilities URI |
N/A |
||
QGis 3.10.2 crashes when displaying two PostGIS raster layers |
N/A |
||
QGIS 3.4.10 crashes - Python |
already fixed in master |
||
WMS provider expects SERVICE=WMTS keyword in uppercase to detect WMTS |
|||
WCS DescribeCoverage response origin always empty |
|||
Extent wrong if layer contains point at 0,0 |
Not a QGIS bug. Fixed in GDAL 3.1 |
N/A |
|
Projection not recognised from Mapinfo converstion |
|||
QGIS crashes/freezes when adding a large CSV file as delimited text layer |
|||
QGIS 3.12 unknown CRS or Select Transformation |
|||
BIGTIFF error is not obvious in processing log |
Această funcționalitate a fost finanțată de QGIS.ORG (Prin programul de donații și susține)
Această funcționalitate a fost dezvoltată de Even Rouault
Titlul Erorii |
URL issues.qgis.org (dacă a fost raportată) |
URL Commit (Github) |
3.10 backport commit (GitHub) |
---|---|---|---|
Fix segfault when adding a layer |
N/A |
||
Fix signal connection |
Unreported issue |
N/A |
|
Update the API to export a legend in JSON |
Unreported binding issue |
N/A |
|
Core dump if vector tile layer (file) becomes unavailable |
nu se poate reproduce |
N/A |
|
Crash on project open when mapcanvas extents = nan |
nu se poate reproduce |
N/A |
|
Using some functions in raster calulator crashes QGIS |
N/A |
||
Auxiliary storage not usable in non editable layer |
Already fixed. Closed. |
N/A |
|
Fix compilation with GCC 10, Qt/PyQt 5.15.0 and SIP 4.19.23 |
Această funcționalitate a fost finanțată de QGIS.ORG (Prin programul de donații și susține)
Această funcționalitate a fost dezvoltată de Paul Blottiere
Titlul Erorii |
URL issues.qgis.org (dacă a fost raportată) |
URL Commit (Github) |
3.10 backport commit (GitHub) |
---|---|---|---|
Reproducible crash using QgsMapCanvas.items() with Oracle layers |
|||
Line breaks are ignored in the user expression help panel |
|||
„Edit user expression” does not allow to rename the user expression |
N/A |
||
Cannot change labels of raster symbology classes |
|||
Crash when layer not available |
Nu se poate reproduce |
N/A |
|
Select by expression returns erroneous results with integer field division for shapefiles |
N/A |
||
Using concat(field1, field2) concatenates 0 instead of empty string («») if any of the fields is NULL |
|||
Stuck at Recent Project window when opening blank file in 3.10.3 |
Nu se poate reproduce |
N/A |
|
QGIS crashes on getting items of mapCanvas scene if features are identified |
|||
sorting on a column that has a value relation is inconsistent |
|||
Missing points (depending on canvas scale) in virtual layer based on sqlite file |
|||
Project is modified as soon as you move cursor on canvas |
|||
Set filter applied to wrong „version” of table when multiple geometry types |
Această funcționalitate a fost finanțată de QGIS.ORG (Prin programul de donații și susține)
Această funcționalitate a fost dezvoltată de Julien Cabieces
Titlul Erorii |
URL issues.qgis.org (dacă a fost raportată) |
URL Commit (Github) |
3.10 backport commit (GitHub) |
---|---|---|---|
Vertex tool override global snapping parameters |
N/A |
||
QGIS crashes with QgsGeometry method on empty collection |
N/A |
||
Selective masking: phantom lines on dark background |
N/A |
||
Selective masking: issue with mask opacity |
N/A |
Această funcționalitate a fost finanțată de QGIS.ORG (Prin programul de donații și susține)
Această funcționalitate a fost dezvoltată de Bertrand Rix
Titlul Erorii |
URL issues.qgis.org (dacă a fost raportată) |
URL Commit (Github) |
3.10 backport commit (GitHub) |
---|---|---|---|
[Oracle]Error on save geometries because wrong default values #34482 |
N/A |
||
Invalid query for default value of date column of an oracle layer |
N/A |
||
Fields missing in Visibility by expression for a group in drag/drop form |
N/A |
||
Project custom scales are displayed with scientific notation |
N/A |
||
Oracle : tables are listed once for Polygons and once for MultiPolygons but both show all geometries |
N/A |
||
Can’t set min/max values to decimal in raster symbology with QGis Linux versions |
N/A |
Această funcționalitate a fost finanțată de QGIS.ORG (Prin programul de donații și susține)
Această funcționalitate a fost dezvoltată de Sebastien Peillet
Titlul Erorii |
URL issues.qgis.org (dacă a fost raportată) |
URL Commit (Github) |
3.10 backport commit (GitHub) |
---|---|---|---|
Copy of truncated variable copies truncated text, not original |
|||
Turning Multi edit mode off does not go back to table view |
|||
GRASS processing: missing parameter name |
|||
Fix redirection of the stdout results to temporary files in GRASS Processing algorithms |
neraportat |
||
Fix GRASS r.tileset algorithm |
neraportat |
||
QgsRasterTerrainAnalysisPlugin: check QgsRelief::processRaster() returned value |
|||
Histogram for graduated style in layer properties disappears when the layer properties window is too small |
|||
Exporting image with atlas option „Save World file” lead to incorrect world file naming (text after dot is missing) |
|||
„Reloading QGIS” from the crash report dialog fails to reopen the project |
|||
Exporting raster style to SLD only works when output file has .sld suffix |
|||
[Style Manager] Missing Favorites category in the „select by group” dialog from „Export symbols” |
non critic |
||
TIN Interpolation - output raster format and size issues |
|||
Layer panel: „Edit Symbol” does nothing if no symbol defined for a rule (in rule-based rendering) |
non critic |
||
Attributes shift in the Service area algorithm results |
neraportat |
N/A |
|
Processing testing framework does not apply rounding to values casted to numbers |
neraportat |
N/A |
Această funcționalitate a fost finanțată de QGIS.ORG (Prin programul de donații și susține)
Această funcționalitate a fost dezvoltată de Alexander Bruy
Titlul Erorii |
URL issues.qgis.org (dacă a fost raportată) |
URL Commit (Github) |
3.10 backport commit (GitHub) |
---|---|---|---|
Fix leak in mesh 3d renderer |
neraportat |
N/A |
|
Fix hang when rendering symbol previews using Meters in Map Unit sizes |
No – too intrusive |
||
Fix font in CSS code editor |
neraportat |
non critic |
|
Fix rendering of geometry generator expressions which return geometry collection results |
No – too intrusive |
||
[processing] Correctly expose date time inputs (and a bunch of others) as inputs for in-model expressions |
N/A |
||
Fix all Qt 5.14 deprecation warnings |
neraportat |
No – too intrusive |
|
[symbology] When rendering a multipart geometry, ensure that geometry generator symbol is only rendered once, instead of once per part |
No – too intrusive |
||
[layout] Make „show feature count” button apply to all selected indexes |
No – too intrusive |
||
Fix for container „show as group box” setting is lost when closing layer properties dialog |
N/A |
||
Use even more forceful language to dissuade users from creating custom projections using Proj strings |
No – string change |
||
Use „markers” terminology consistently in centroid fill widget |
No – string change |
||
Fixes to numbered list handling in dox/PyQGIS API |
neraportat |
Nu |
|
Fix cross references in PyQGIS docs |
neraportat |
Nu |
|
[layouts] Fix attribute table sort order combined with feature filter results in empty tables |
N/A |
||
Fix callout rendering to rotated labels |
N/A |
||
Fix grass output handling in Processing models |
|||
Fix vector datasets incorrectly simplify to rectangles in some CRS views |
No – too intrusive |
||
Fix list item formatting in PyQGIS docs |
neraportat |
N/A |
|
[processing] Fix manual entry of extent values in widget |
N/A |
||
[decorations] Use a proper ellipsoidal length calculation when calculating the size of the scalebar decoration |
|||
Fix collecting Triangle geometry types after tesselation |
No – too intrusive |
||
Fix writing triangle geometry type via QgsVectorFileWriter fails |
No – too intrusive |
||
Fix degradation in Tesselation results |
N/A |
||
Fix layer subset string is ignored when OGR refuses to accept a compiled feature request expression |
|||
[legends] Fix corrupted data defined legend rendering in layout designer |
No – too intrusive |
||
Avoid some QGIS startup warnings |
neraportat |
N/A |
|
Place 3d tab in vector properties at the correct position |
N/A |
||
Fix 3d tab is not activated when reopening vector layer properties |
N/A |
||
[labeling] Fix incorrect label placement after moving an «unplaced» label |
neraportat |
||
Don’t block creation of new geopackages in vector save as dialog |
neraportat |
N/A |
|
[browser] Refine refreshConnections method to avoid triggering a full refresh of ALL browser content |
No – too intrusive |
||
[3d] When showing edges, data defined polygon height was not accounted for |
neraportat |
N/A |
|
Fixes for „Show all” labeling mode |
neraportat |
N/A |
|
[3d] Fix reprojection of features shows no features |
N/A |
||
[processing] Add metadata setting for file destination parameters to avoid file overwrite confirmation prompt |
N/A |
||
Avoid incorrectly antialiasing rendering of certain objects (such as map labels) when not wanted |
No – too intrusive |
||
Ensure that fields required by marker symbol backgrounds for labels are fetched when rendering |
No – too intrusive |
||
„Fix „”zoom”” and „”flash”” features buttons have no effect when opening filter mode in attribute form” |
N/A |
||
Avoid corrupted project thumbnail images in some circumstances |
neraportat |
N/A |
|
Auto focus search box when opening „add layer to legend” dialog |
non critic |
||
[processing] Set correct output layer type for Point to Layer algorithm |
N/A |
||
„Limit scope of Ctrl+C shortcut for copy features to canvas and for python console to console widget” |
#27035 (many others too) |
No – too intrusive |
|
Remember layout designer window positions |
non critic |
||
Fix crash when zooming in too far to labels |
|||
[processing] Allow parent layer to be specified for field mapping inputs in models |
No – too intrusive |
||
Fix placement of message bar «clear all» menu arrow on hidpi screens |
neraportat |
non critic |
|
Always refresh plugin repositories when manually triggered by user |
|||
[3d] Expose 3d algorithms provider to Python |
No – too intrusive |
||
[symbology] Don’t force rasterized output when exporting point pattern fills |
No – too intrusive |
||
[layouts] Don’t refresh the map canvas multiple times during atlas exports |
non critic |
||
[processing] Fix double-evaluation of warp output parameter |
|||
Fix incorrect warning message when turning off atlas preview |
neraportat |
N/A |
|
Speed up message bar operations when many messages are shown |
No – too intrusive |
||
Fix oriented minimum bounding box calculation is wrong in some cases |
|||
Ensure symbol opacity is always ignored for selections |
|||
Fix random sort order of symbols in Symbol Export dialog |
|||
Allow clearing heatmap weighting field |
|||
Flag SAGA «Merge Layers» algorithm as having known issues |
N/A |
||
Workaround odd upstream Qt issue where a painter with a semi-transparent brush with no solid pattern incorrectly applies the brush opacity to the pen when exporting to printer devices |
|||
Improve plugin watchdog message and UX |
neraportat |
No – too intrusive |
|
„[layouts] Warn when previewing an atlas and a feature with no geometry is encountered, when one or more maps are set to be driven by atlas feature” |
No – too intrusive |
||
Avoid proj «object is not a concatenated operation» warnings |
neraportat |
||
„Fix memory layers lose CRS definition if it does not have an authority associated with it” |
|||
Implement spatial index detection for OGR provider |
|||
Fix incorrect dialog title for raster layer properties |
|||
Don’t try to identify CRSes created just for ellipsoid definitions |
neraportat |
No – too intrusive |
Această funcționalitate a fost finanțată de QGIS.ORG (Prin programul de donații și susține)
Această funcționalitate a fost dezvoltată de Nyall Dawson
Titlul Erorii |
URL issues.qgis.org (dacă a fost raportată) |
URL Commit (Github) |
3.10 backport commit (GitHub) |
---|---|---|---|
allow sorting attribute table by field not listed in the table |
N/A |
||
fix layer tree dependencies (showinf symbols and main layer) |
neraportat |
N/A |
|
fix Expression editor: syntax check fails if table is empty |
N/A |
||
fix setting of feature in expression preview widget |
N/A |
||
Freeze when showing attribute table of WFS layer |
not yet fixed |
N/A |
|
Lookups in tables with more than 100 entries show wrong value in Relation Reference form parts |
Această funcționalitate a fost finanțată de QGIS.ORG (Prin programul de donații și susține)
Această funcționalitate a fost dezvoltată de Denis Rouzaud
Titlul Erorii |
URL issues.qgis.org (dacă a fost raportată) |
URL Commit (Github) |
3.10 backport commit (GitHub) |
---|---|---|---|
SpatiaLite support for importing layers with binary fields |
N/A |
||
PostGIS support for importing layers with binary fields |
Această funcționalitate a fost finanțată de Kongsberg Digital
Această funcționalitate a fost dezvoltată de Audun Ellertsen