Class: QgsAttributeTableFilterModel¶
-
class
qgis.gui.
QgsAttributeTableFilterModel
(canvas: QgsMapCanvas, sourceModel: QgsAttributeTableModel, parent: QObject = None)¶ Bases:
PyQt5.QtCore.QSortFilterProxyModel
,QgsFeatureModel
Make sure, the master model is already loaded, so the selection will get synchronized.
- Parameters
parent (QObject = None) – parent object (owner)
sourceModel (QgsAttributeTableModel) – The
QgsAttributeTableModel
to use as source (mostly referred to as master model)canvas (QgsMapCanvas) –
The mapCanvas. Used to identify the currently visible features.
Methods
Gets the index of the first column that contains an action widget.
beginInsertColumns
beginInsertRows
beginMoveColumns
beginMoveRows
beginRemoveColumns
beginRemoveRows
changePersistentIndex
- param parent
createIndex
- param index
decodeData
Is called upon every change of the visible extents on the map canvas.
- param fid
- param fid
Returns
True
if the source row will be acceptedUpdates the filtered features in the filter model.
The current filterModel
Gets a list of currently filtered feature ids
- param index
Updates the list of currently visible features on the map canvas.
- param section
Returns the layer this filter acts on.
Returns the layerCache this filter acts on.
Used by the sorting algorithm.
Returns the map canvas
- param sourceIndex
- param sourceIndex
- param proxyIndex
- param proxyIndex
Returns the table model this filter is using
Returns the feature id for a given model index.
Returns if selected features are currently shown on top
Set the attribute table configuration to control which fields are shown, in which order they are shown as well as if and where an action column is shown.
Set the
expression
and thecontext
to be stored in case of the features need to be filtered again (like on filter or on main model data change).Set the filter mode the filter will use.
Specify a list of features, which the filter will accept.
Changes the sort order of the features.
Set the attribute table model that backs this model
Sort by the given column using the given order.
The expression which is used to sort the attribute table.
Signals
Emitted whenever the sort column is changed
Attributes
-
class
ColumnType
¶ Bases:
int
-
baseClass
¶ alias of
QgsAttributeTableFilterModel
-
-
ColumnTypeActionButton
= 1¶
-
ColumnTypeField
= 0¶
-
class
FilterMode
¶ Bases:
int
-
baseClass
¶ alias of
QgsAttributeTableFilterModel
-
-
class
Role
¶ Bases:
int
-
ShowAll
= 0¶
-
ShowEdited
= 4¶
-
ShowFilteredList
= 3¶
-
ShowSelected
= 1¶
-
ShowVisible
= 2¶
-
TypeRole
= 258¶
-
actionColumnIndex
(self) → int¶ Gets the index of the first column that contains an action widget. Returns -1 if none is defined.
- Return type
int
-
QgsAttributeTableFilterModel.beginInsertColumns(self, QModelIndex, int, int)
-
QgsAttributeTableFilterModel.beginInsertRows(self, QModelIndex, int, int)
-
QgsAttributeTableFilterModel.beginMoveColumns(self, QModelIndex, int, int, QModelIndex, int) -> bool
-
QgsAttributeTableFilterModel.beginMoveRows(self, QModelIndex, int, int, QModelIndex, int) -> bool
-
QgsAttributeTableFilterModel.beginRemoveColumns(self, QModelIndex, int, int)
-
QgsAttributeTableFilterModel.beginRemoveRows(self, QModelIndex, int, int)
-
beginResetModel
(self)¶
-
QgsAttributeTableFilterModel.changePersistentIndex(self, QModelIndex, QModelIndex)
-
changePersistentIndexList
(self, Iterable[QModelIndex], Iterable[QModelIndex])¶
-
childEvent
(self, QChildEvent)¶
-
columnCount
(self, parent: QModelIndex) → int¶ - Parameters
parent (QModelIndex) –
- Return type
int
-
connectNotify
(self, QMetaMethod)¶
-
QgsAttributeTableFilterModel.createIndex(self, int, int, object: object = 0) -> QModelIndex
-
customEvent
(self, QEvent)¶
-
data
(self, index: QModelIndex, role: int) → Any¶ - Parameters
index (QModelIndex) –
role (int) –
- Return type
Any
-
QgsAttributeTableFilterModel.decodeData(self, int, int, QModelIndex, QDataStream) -> bool
-
disconnectNotify
(self, QMetaMethod)¶
-
encodeData
(self, Iterable[QModelIndex], QDataStream)¶
-
endInsertColumns
(self)¶
-
endInsertRows
(self)¶
-
endMoveColumns
(self)¶
-
endMoveRows
(self)¶
-
endRemoveColumns
(self)¶
-
endRemoveRows
(self)¶
-
endResetModel
(self)¶
-
extentsChanged
(self)¶ Is called upon every change of the visible extents on the map canvas. When a change is signalled, the filter is updated and invalidated if needed.
Deprecated since version QGIS: 3.10.3 - made private as reloadVisible()
-
fidToIndex
(self, fid: int) → QModelIndex¶ - Parameters
fid (int) –
- Return type
QModelIndex
-
fidToIndexList
(self, fid: int) → List[QModelIndex]¶ - Parameters
fid (int) –
- Return type
List[QModelIndex]
-
filterAcceptsColumn
(self, int, QModelIndex) → bool¶
-
filterAcceptsRow
(self, sourceRow: int, sourceParent: QModelIndex) → bool¶ Returns
True
if the source row will be accepted- Parameters
sourceRow (int) – row from the source model
sourceParent (QModelIndex) – parent index in the source model
- Return type
bool
-
filterFeatures
(self)¶ Updates the filtered features in the filter model. It is called when the data of the main table or the filter expression changed.
New in version 3.10.3.
-
filterMode
(self) → QgsAttributeTableFilterModel.FilterMode¶ The current filterModel
- Return type
-
filteredFeatures
(self) → object¶ Gets a list of currently filtered feature ids
- Return type
object
- Returns
A list of feature ids
-
flags
(self, index: QModelIndex) → Qt.ItemFlags¶ - Parameters
index (QModelIndex) –
- Return type
Qt.ItemFlags
-
generateListOfVisibleFeatures
(self)¶ Updates the list of currently visible features on the map canvas. Is called automatically when the filter mode is adjusted or the extents changed.
-
headerData
(self, section: int, orientation: Qt.Orientation, role: int) → Any¶ - Parameters
section (int) –
orientation (Qt.Orientation) –
role (int) –
- Return type
Any
-
invalidateFilter
(self)¶
-
isSignalConnected
(self, QMetaMethod) → bool¶
-
layer
(self) → QgsVectorLayer¶ Returns the layer this filter acts on.
- Return type
- Returns
Abovementioned layer
-
layerCache
(self) → QgsVectorLayerCache¶ Returns the layerCache this filter acts on.
- Return type
- Returns
The layer cache
-
lessThan
(self, left: QModelIndex, right: QModelIndex) → bool¶ Used by the sorting algorithm. Compares the two model indices. Will also consider the selection state of the feature in case selected features are to be shown on top.
- Parameters
left (QModelIndex) –
right (QModelIndex) –
- Return type
bool
-
mapCanvas
(self) → QgsMapCanvas¶ Returns the map canvas
- Return type
-
mapFromMaster
(self, sourceIndex: QModelIndex) → QModelIndex¶ - Parameters
sourceIndex (QModelIndex) –
- Return type
QModelIndex
-
mapFromSource
(self, sourceIndex: QModelIndex) → QModelIndex¶ - Parameters
sourceIndex (QModelIndex) –
- Return type
QModelIndex
-
mapToMaster
(self, proxyIndex: QModelIndex) → QModelIndex¶ - Parameters
proxyIndex (QModelIndex) –
- Return type
QModelIndex
-
mapToSource
(self, proxyIndex: QModelIndex) → QModelIndex¶ - Parameters
proxyIndex (QModelIndex) –
- Return type
QModelIndex
-
masterModel
(self) → QgsAttributeTableModel¶ Returns the table model this filter is using
- Return type
- Returns
the table model in quesion
-
persistentIndexList
(self) → List[QModelIndex]¶
-
receivers
(self, PYQT_SIGNAL) → int¶
-
resetInternalData
(self)¶
-
rowToId
(self, row: QModelIndex) → int¶ Returns the feature id for a given model index.
- Parameters
row (QModelIndex) – A model index of the row in question
- Return type
int
- Returns
The feature id of the feature visible in the provided row
-
selectedOnTop
(self) → bool¶ Returns if selected features are currently shown on top
- Return type
bool
- Returns
True
if selected are shown on top
-
sender
(self) → QObject¶
-
senderSignalIndex
(self) → int¶
-
setAttributeTableConfig
(self, config: QgsAttributeTableConfig)¶ Set the attribute table configuration to control which fields are shown, in which order they are shown as well as if and where an action column is shown.
- Parameters
config (QgsAttributeTableConfig) –
-
setFilterExpression
(self, expression: QgsExpression, context: QgsExpressionContext)¶ Set the
expression
and thecontext
to be stored in case of the features need to be filtered again (like on filter or on main model data change).New in version 3.10.3.
- Parameters
expression (QgsExpression) –
context (QgsExpressionContext) –
-
setFilterMode
(self, filterMode: QgsAttributeTableFilterModel.FilterMode)¶ Set the filter mode the filter will use.
- Parameters
filterMode (QgsAttributeTableFilterModel.FilterMode) – Sets the current mode of the filter
-
setFilteredFeatures
(self, ids: object)¶ Specify a list of features, which the filter will accept. The filter mode will automatically be adjusted to show only these features (ShowFilteredList).
- Parameters
ids (object) – The list of feature ids which will be accepted by the filter
-
setSelectedOnTop
(self, selectedOnTop: bool)¶ Changes the sort order of the features. If set to
True
, selected features will be sorted on top, regardless of the current sort column- Parameters
selectedOnTop (bool) – Specify, if selected features should be sorted on top
-
setSourceModel
(self, sourceModel: QgsAttributeTableModel)¶ Set the attribute table model that backs this model
- Parameters
sourceModel (QgsAttributeTableModel) – The model
New in version 2.0.
-
sort
(self, column: int, order: Qt.SortOrder = Qt.AscendingOrder)¶ Sort by the given column using the given order. Prefetches all the data from the layer to speed up sorting.
- Parameters
column (int) – The column which should be sorted
order (Qt.SortOrder = Qt.AscendingOrder) – The order ( Qt.AscendingOrder or Qt.DescendingOrder )
sort(self, expression: str, order: Qt.SortOrder = Qt.AscendingOrder) Sort by the given expression using the given order. Prefetches all the data from the layer to speed up sorting.
- Parameters
expression – The expression which should be used for sorting
order – The order ( Qt.AscendingOrder or Qt.DescendingOrder )
-
sortColumnChanged
¶ Emitted whenever the sort column is changed
- Parameters
column (int) – The sort column
order (Qt.SortOrder) – The sort order [signal]
-
sortExpression
(self) → str¶ The expression which is used to sort the attribute table.
- Return type
str
-
timerEvent
(self, QTimerEvent)¶